The safety of the stainless steel chassis cabinets and manufacturability requirements
Angelina Dong
original
2015-11-05 13:59:32
Stainless steel Chassis cabinets Person can hit the surface of the outside part of the edge must be blunt and deburring, in areas such as the likely exposed sharp corners, edges and made into injury as well as rough surface, the surface coating or plating must be deburred.
Line or must go trough go line hole deburring, in order to prevent the wire through the line broken skin caused by shaking.Out of nut at the end of the chassis, cabinets with screw length, generally no more than is not less than two pitch screw diameter.Parts should guarantee good interchangeability, the mechanical connection of all components shall be solid and reliable.Are the requirements for grounding conductive parts of the cabinet without iron mold, conductive good.
For stainless steel Chassis cabinets The appearance of coating, the color compared with the standard color plate in the range of chromatic aberration.According to the delta E color measurement, color difference within 0.5.Coating surface shall have a uniform appearance, uniform surface gloss.Texture clear, uniform distribution, the coating surface is grinning, no flow, no bumps.
Line or must go trough go line hole deburring, in order to prevent the wire through the line broken skin caused by shaking.Out of nut at the end of the chassis, cabinets with screw length, generally no more than is not less than two pitch screw diameter.Parts should guarantee good interchangeability, the mechanical connection of all components shall be solid and reliable.Are the requirements for grounding conductive parts of the cabinet without iron mold, conductive good.
For stainless steel Chassis cabinets The appearance of coating, the color compared with the standard color plate in the range of chromatic aberration.According to the delta E color measurement, color difference within 0.5.Coating surface shall have a uniform appearance, uniform surface gloss.Texture clear, uniform distribution, the coating surface is grinning, no flow, no bumps.